Like earbuds, there are many budget friendly gaming mice popping out recently from China. The story is the same – flagship 3395 sensor but at a budget friendly price point. The VGN Dragonfly F1 MOBA retails for US$57, is equipped with the Pixart 3395 and has the ability to play at 4000Hz polling.
Unboxing
In the box, you’ll find the following:
- VGN Dragonfly F1 MOBA Wireless Gaming Mouse
- One set of grip tape
- USB-C to USB-A Cable
- USB Wireless Receiver
- USB Wireless Extender
- Quick Start Guide
- Carry pouch
Tech specs
| Dimensions | Length: 121.2 mm Height: 37.6 mm Width: 63.5 mm |
| Weight | 55 grams |
| Sensor | PixArt 3395 – Polling rate:125/250/500/1000/2000/4000Hz (4K requires separate dongle) |
| Buttons | 1. Left click 2. Right click 3. Back button 4. Forward button 5. Scroll click 6. DPI button |
| Switches | Huano Blue Shell Pink Dot |
| Feet/Skates | PTFE |
| Battery life | 130 hours |
| Charging port | USB-C |
| LED lighting effects | None |
Build quality and weight
The VGN Dragonfly F1 MOBA is essentially the same as the F1 Pro Max, just that it uses the Huano Blue Shell Pink Dot switches instead the Kailh GM 8.0. The mouse is available in two colour options – (1) white, and (2) black. The unit I have is the black colour option. VGN Dragonfly F1 MOBA weighs in at 55g which is lightweight enough for my use.
Build quality of the VGN Dragonfly F1 MOBA is solid. There isn’t any creaking or rattling observed when squeezing the mouse or during my use in-game. The weight balance is nicely in the middle.
Buttons
The main buttons of the VGN Dragonfly F1 MOBA uses the Huano Blue Shell Pink Dot switches, which offer a crisp light click feel which makes is very spammable. My only minor gripe is the right click sometimes exhibit a high-pitched ping sound to it, but doesn’t affect the feel of the click. It could be just an issue with my copy. Tensioning is good, with almost close to no pre or post-travel. I also like the subtle comfort grooves on the main buttons.
Side buttons are generously sized, and are nicely positioned so that it is easy for my thumb to reach. The buttons are snappy, and very minimal pre-travel and some post-travel. The actuation force on the side buttons feels just a tad heavier than on the main buttons.
You can check out the clicks and scroll wheel sounds below:
Scroll wheel
Scroll wheel uses a TTC silver encoder which have quite noticeable tactility in the steps. Comparing with the Pulsar X2 Mini, the steps feel more defined, and the scrolling feels bumpier and heavier. This would be ideal if you use the scroll wheel to switch through inventory items, but if you use it jump then the scroll can feel a tad heavy in use. Scrolling has a low frequency sound, and the scroll click (middle click) has low thud-like sound.
Coating / Texture
Initially when I first felt the VGN Dragonfly F1 MOBA, I thought it didn’t have much of a coating as it have a smooth matte texture to it. Once there a little warmth and dampness in my grip, I could start to feel more of the grip on the coating. If you want a more secure grip in the hand, you can use the included grip tape in the box. It’s really nice to see VGN supplying grip tape, and the quality feels like those from BT.L.
Shape and fit
The VGN Dragonfly F1 MOBA has its own unique, which I don’t think is based off any particular brand. My hand size measure 18cm * 8.5cm, and I use a relaxed claw grip. Despite the shape being different from a Pulsar X2, I found the shape to work quite well for my grip style. The VGN Dragonfly F1 MOBA has gentle curvatures throughout, it doesn’t have any part is that is overly pronounced.
The hump is centered and slopes down quite gradually. This creates a back that has a relaxed angle which allow for a gentle palm contact. If you prefer mice that pushes up against your palm for a locked-in feel then the VGN Dragonfly F1 MOBA won’t give that. Instead, if you prefer some breathing room for micro-adjustments, then the VGN Dragonfly F1 MOBA offers comfortable palm contact.
The sides of the VGN Dragonfly F1 MOBA curve inwards in a way that is rather gentle, nothing too aggressive. The width of the narrowest side is good enough to balance out the overall length of the mouse.
I feel the VGN Dragonfly F1 MOBA will work the best for claw grip users, and perhaps palm grip. It is best suited for folks who enjoy some flexibility in their grip, especially to make quick vertical adjustments on the fly.
Performance
The stock skates are pretty good, thick enough and have slightly rounded edges. The glide is reasonably smooth, but of course not comparable to aftermarket skates such as Tiger Ice. As for sensor, the VGN Dragonfly F1 MOBA packs the latest Pixart 3395 sensor, which supports up to 26,000 DPI. Out the box, the DPI steps are 400, 800, 1600, and 3200. Performance was great, I did not experience any issues while playing Valorant on a 165Hz monitor.
VGN Dragonfly F1 MOBA can support up to 4000Hz polling rate, but you have to purchase separate dongle for it. By default, the VGN Dragonfly F1 MOBA supports up to 1000Hz polling and I found it be good enough and reliable.
As for software, it is called VGN HUB and available in English language. The UI is clean and easy to navigate to apply customisation and settings. Do note there is a setting called “Sleep Time Setting”, so if you play games like Valorant where you mouse can be idle when holding an angle, do make sure to adjust the timing in the software to one that is suitable.
Conclusion
It is simply amazing that the VGN Dragonfly F1 MOBA retails for just US$57. The build quality is pretty good, and I particularly like how the Huano switches feel on this MOBA version. I would say the shape is safe, as long as you don’t rely too much on a high back hump. If you’re looking for your first gaming mouse, I’d say the VGN Dragonfly F1 MOBA is a strong contender.